Factory Reset Instructions
- Turn off 8300 and wait 5 or more seconds.
- Unplug power cord from 8300 and wait 5 or more seconds.
- If you are resetting an external drive too, unplug it's power cord at this point and wait 5 or more seconds, then plug power cord back into external drive and wait 5 or more seconds.
- Press and hold Power on 8300 front panel. While Power is depressed, plug 8300 power cord back in. Continue to hold Power until 8300 display says "boot" and/or begins to cycle a few times (usually about 15 seconds).