Bosch Dishwasher

Factory Reset Instructions

  1. Start with the dishwasher turned on.
  2. Press and hold the {Start} button for 3 seconds - in some cases this button will be labeled as "Reset 3 sec".

E15 Error Fix

The E15 error on Bosch dishwashers is usually a sign that water has gotten into the bottom of the dishwasher. In order to fix this error you will need to do the following:

  1. Turn off the water supply to the dishwasher (this is not required, but is good practise).
  2. Pull the dishwasher away from the wall - if your dishwasher is integrated you might need to unscrew a few screws that hold it into the cupboard.
  3. Once the dishwasher is free to move - tilt the dishwasher back at an angle of 45 degrees or more.
  4. The water that is stuck in the bottom of the machine will come out, so have a towel or cloth handy to clean up.
  5. You might need to wait a little longer after performing the above instructions for the sensor inside to dry, the E15 error will now be fixed.

Error Code Explanations

  • E01 > E05 - All of these codes indicate a power supply issue.
  • E06 - Door switch fault.
  • E07 - Dryer fan fault.
  • E08 - Lack of water in the machine.
  • E09 - Heating circuit failure.
  • E11 - NTC Thermistor fault.