Humax DTR-T1000 (Youview)

Factory Reset Instructions

1. Start with the YouView box powered off from the switch on the REAR panel power button
2. Power back on the YouView box using the REAR panel power button
3. When the FRONT power button is illuminated with an orange circle, press the FRONT panel power button firmly once and it will turn blue (See below- Step 3)
4. Immediately press and hold the "VOL-" button which can be found on the right of the FRONT panel the first silver button.
5. A message saying "Enter Maintenance Mode Y/N (Y: POWER)" appears on the TV screen
6. Press the FRONT panel power button firmly once and wait for about 1 minute until the Maintenance Mode screen appears.
7. Using the P+/P- buttons on the FRONT panel to move up and down the menu, navigate to either of the Factory Reset options.
8. Once highlighted Press VOL- on the FRONT panel to select this option
9. You will need to press VOL- on the FRONT panel to confirm.