GE Dishwasher

Factory Reset Instructions

  1. Hold the Select Cycle button and the Start button down for five seconds.
  2. Then press the Select Cycle button for five seconds.
  3. Lock button light should activate.
  4. Press Select Cycle again for five seconds.
  5. Hold the Start button now for five seconds, the button should start flashing.
  6. Hold the Start and Select Cycle button down for five seconds.
  7. Dishwasher should now be reset.

Error Code Meanings

  • FTD - Failure to drain, check filters in base of machine and the function of the drain pump, you may also need to clean or replace the pressure sensor in the machine.