Maytag MDG25PR Commercial Washer

Factory Reset Instructions

1. Unplug the power cord, OPEN the door and REPLUG the power cord.
2. Right after “SYnC” appears, press the buttons in the following sequence within 6 seconds:
   1. Press the LOWER RIGHT button.
   2. Press the LOWER LEFT button.
   3. Press the LOWER RIGHT button.
   4. Press the LOWER MIDDLE button.
   5. Press the LOWER LEFT and LOWER RIGHT button at the same time
3. “HHHH” should appear on the screen.
4. Press lower left 3 times “H.H.H.H” should appear on the screen.
5. Then “SC.##” will appear on the screen.
6. Press the LOWER LEFT and LOWER RIGHT button at the same time.
7. “rES” will appear on the screen.
8. Unplug the power cord from the machine, unit is now reset.