Nanoleaf Canvas

Factory Reset Instructions

  1. Disconnect the system from power (unplug from the wall or the square).
  2. While holding the Power and Dim buttons, plug the power supply back into power (or the squares).
  3. Continue holding the buttons down until the button LEDs on the Control Square light up.
  4. Once the button LEDs come on, release the buttons. The button LEDs will flash to indicate that a hard reset will now take place.
  5. The Control Square will reset to factory defaults and boot up.
  6. The Canvas is ready to be set up once the Power Button LED stops flashing and the squares begin cycling through different colours.