Nanoleaf Shapes

Factory Reset Instructions

  1. Disconnect the system from power (unplug from the wall or the square).
  2. Make sure that your Shapes are plugged in to power and have booted up (during boot-up, all panels are white).
  3. Press and hold the Power and Plus (+) buttons for 10 seconds. The button LEDs on the Controller will start flashing rapidly.
  4. Release the two buttons, and after a few moments the Power button LED will remain on and steady.
  5. Delete your Shapes from the app, and then pair them again.
Retrieved from "https://factory-reset.com/w/index.php?title=Nanoleaf_Shapes&oldid=4587"