Ring Video Doorbell
- Press the orange button on the back of the unit firmly and release it without holding it down.
- Hold down the orange button for 20 seconds.
- After releasing it, the light on the front will flash a few times indicating that your Ring Doorbell is restarting.
- Give it about a minute to fully complete this process, then put it in setup mode again by briefly pressing the orange button on the back.
Ring Video Doorbell Pro
- First remove the front facia cover on the doorbell.
- Hold down the right button for a full 30 seconds.
- The doorbell should restart, once it has done so, press the right button briefly and you will enter setup mode.