Sanyo DP42647

Service Menu Access Code

1. Unplug the power cable for few minutes.
2. Press and hold the {VOL -} button on the TVwhile plugging the power cable back into the outlet.
3. Keep pressing the {VOL -} button until the TV powers on with the Service Menu displayed.
   • Some menus might have sub-addresses. Use the numeric buttons {0} - {7} to adjust sub-item data.
4. To exit, press the {MENU} button or turn the power off.

Disable Overscan

1. Use the Up/Down and Left/Right arrow keys on the remote (D-pad) to cycle through the options. This will be accomplished with the left-most number highlighted in a green block. You will want to use the Up/Down arrows to move to Item #25 (LetteerBoxOvSc).
2. Now use the Left/Right arrow to move the green box to the column labeled “Value”. Change the number to 0 using the Up/Down arrows, then use the Left/Right arrow to move back to the ”Index” column.
3. Now use the Up/Down arrows to go to item # 55 (LeftOvS), and again use the Left/Right arrow to move to the “Value” column and change the number to 0 using the Up/Down arrows.
4. Move back to the “Index” column and repeat step 8 for items 56 – 58 (RightOvS, TopOvS, and BottomOvS).
5. When all items are 0, press the “Menu” button on the remote to return to regular viewing mode.