JVC

Service Menu Instructions

Most of our JVC Service Menu methods require the use of an original remote, typically you can not do it with just the buttons on the front of the set. If you no longer have your remote or have damaged it, we recommend that you purchase a Replacement Remote before trying to enter the service menu.

Method 1

1. Press the {MENU} button and go to the User Menu screen, make sure that the indicator (arrow) is pointed and highlights the "Picture Control".
2. The buttons on top of the remote are set to TV & VCR respectively.
3. Set sleep timer to "0" minutes and while it is displayed, simultaneously press the {VIDEO STATUS} & {DISPLAY} buttons.
4. The Service Menu will be displayed.
   1. Use the number keys {1-9} to select a category.
   2. Use the {CH+} {CH-} buttons to select options.
   3. Use the {VOL+} {VOL-} buttons to change settings.
   4. Use the {MUTING} button to save settings.
5. Press the {BACK} button to exit the Service Menu.

Method 2

1. Simultaneously press "Display" & "Video Status" buttons on the remote cotnrol.
2. Use 'Menu Up' & 'Menu Dn' button to select an item to adjust.
3. To change the data value to selected item, use ( > ) or ( < ) button on the remote control.
4. Press "EXIT' button to 'Exit' from service mode.

Projector Service Menu

1. Using the remote control:
2. Press the {UP} {DOWN} {RIGHT} {LEFT} buttons.
3. Then press the {ENTER} button.
4. The Service Menu will be displayed.
5. To exit, turn the power off.