Sony Service Menu Instructions
Most of our Sony Service Menu methods require the use of an original remote, typically you can not do it with just the buttons on the front of the set. If you no longer have your remote or have damaged it, we recommend that you purchase a Replacement Remote before trying to enter the service menu.
Please be careful when navigating through the Sony TV/LCD service menu - in some cases, changes to some of the options can cause irreparable damage to your set - in most cases we would suggest that you take photos of the original settings for the set, and make sure you fully understand each of the Sony Service Menu options before changing any of them !
Method 1
Put the TV in standby mode then press the following buttons on the remote: {DISPLAY} {5} {VOL+} {POWER}
Method 2
Put the TV in standby mode then press the following buttons on the remote: {DISPLAY} {5} {POWER}
Method 3
Put the TV in standby mode then press the following buttons on the remote: {DISPLAY} {5} {PICTURE} {POWER}
Method 4
Put the TV in standby mode then press the following buttons on the remote: {DISPLAY} {5} {VOL+} {PICTURE} {POWER}
Exit Service Menu = <Power>
Menu Next = <1>
Menu Previous = <4>
Category Next = <2>
Category Previous = <5>
Adjust Up = <3>
Adjust Down = <6>
Save New Settings = <MUTE> <ENTER>
Restore Factory Defaults = <8> <ENTER>